SEYMOUR DUNCAN
STK-S4/6/7/9 Stack Plus
FOR STRAT

 
 STK-S4n-White

SEYMOUR DUNCAN
CLASSIC STACK PLUS
STRAT NECK-
WHITE

STK-S4n-White
Seymour Duncan STK-S4n "Classic Stack Plus" pickup for Stratocaster®. Neck position. White. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to a traditional Strat pickup coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces to deliver authentic "quack" and "chime". The Patent-Pending top coil is shielded with proprietary “?ux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Seymour Duncan calibrates each Stack Plus pickup for maximum hum cancellation, allowing for extraordinarily low levels of noise. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Three-conductor cable allows splitting for true single coil mode. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S4n-Black

SEYMOUR DUNCAN
CLASSIC STACK PLUS
STRAT NECK-
BLACK

STK-S4n-Black
Seymour Duncan STK-S4n "Classic Stack Plus" pickup for Stratocaster®. Neck position. Black. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to a traditional Strat pickup coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces to deliver authentic "quack" and "chime". The Patent-Pending top coil is shielded with proprietary “?ux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Seymour Duncan calibrates each Stack Plus pickup for maximum hum cancellation, allowing for extraordinarily low levels of noise. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Three-conductor cable allows splitting for true single coil mode. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
 STK-S4b-White SEYMOUR DUNCAN
CLASSIC STACK PLUS
STRAT BRIDGE-
WHITE
STK-S4b-White
Seymour Duncan STK-S4b "Classic Stack Plus" pickup for Stratocaster®. Bridge position. White. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to a traditional Strat pickup coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces to deliver authentic "quack" and "chime". The Patent-Pending top coil is shielded with proprietary “?ux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Seymour Duncan calibrates each Stack Plus pickup for maximum hum cancellation, allowing for extraordinarily low levels of noise. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Three-conductor cable allows splitting for true single coil mode. Made in the USA. Wiring diagram and mounting screws are included.
$85.00
STK-S4b-Black

SEYMOUR DUNCAN
CLASSIC STACK PLUS
STRAT BRIDGE-
BLACK

STK-S4b-Black
Seymour Duncan STK-S4b "Classic Stack Plus" pickup for Stratocaster®. Bridge position. Black. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to a traditional Strat pickup coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces to deliver authentic "quack" and "chime". The Patent-Pending top coil is shielded with proprietary “?ux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Seymour Duncan calibrates each Stack Plus pickup for maximum hum cancellation, allowing for extraordinarily low levels of noise. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Three-conductor cable allows splitting for true single coil mode. Made in the USA. Wiring diagram and mounting screws are included.
$85.00
STK-S4m-White

SEYMOUR DUNCAN
CLASSIC
STACK PLUS
STRAT
MIDDLE
WHITE

STK-S4m-White
Seymour Duncan STK-S4m "Classic Stack Plus" pickup for Stratocaster®. Middle position. White. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to a traditional Strat pickup coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces to deliver authentic "quack" and "chime". The Patent-Pending top coil is shielded with proprietary “?ux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Seymour Duncan calibrates each Stack Plus pickup for maximum hum cancellation, allowing for extraordinarily low levels of noise. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Three-conductor cable allows splitting for true single coil mode. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S4m-Black

SEYMOUR DUNCAN
CLASSIC
STACK PLUS
STRAT MIDDLE
BLACK

STK-S4m-Black
Seymour Duncan STK-S4m "Classic Stack Plus" pickup for Stratocaster®. Middle position. Black. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to a traditional Strat pickup coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces to deliver authentic "quack" and "chime". The Patent-Pending top coil is shielded with proprietary “?ux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Seymour Duncan calibrates each Stack Plus pickup for maximum hum cancellation, allowing for extraordinarily low levels of noise. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Three-conductor cable allows splitting for true single coil mode. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S6-White

SEYMOUR DUNCAN
CUSTOM
STACK PLUS
FOR STRAT
WHITE

STK-S6-White
Seymour Duncan STK-S6 "Custom Stack Plus" pickup for Strat®. White. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to the popular SSL-5 Custom and features symmetrically staggered, sand-cast, Alnico 5 pole pieces. The Patent-Pending top coil is shielded with proprietary "Flux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S6b-Black

SEYMOUR DUNCAN
CUSTOM
STACK PLUS
FOR STRAT
BLACK

STK-S6-Black
Seymour Duncan STK-S6 "Custom Stack Plus" pickup for Strat®. Black. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is similar to the popular SSL-5 Custom and features symmetrically staggered, sand-cast, Alnico 5 pole pieces. The Patent-Pending top coil is shielded with proprietary "Flux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S7b-White

SEYMOUR DUNCAN
VINTAGE
HOT STACK PLUS
FOR STRAT
WHITE

STK-S7b-White
Seymour Duncan STK-S7b "Vintage Hot Stack Plus" pickup for Strat®. Bridge position. White. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is wound like an overwound vintage single coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces. The Patent-Pending top coil is shielded with proprietary "Flux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S7b-Black

SEYMOUR DUNCAN
VINTAGE
HOT STACK PLUS
FOR STRAT
BLACK

STK-S7b-Black
Seymour Duncan STK-S7b "Vintage Hot Stack Plus" pickup for Strat®. Bridge position. Black. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is wound like an overwound vintage single coil and features symmetrically staggered, sand-cast, Alnico 5 pole pieces. The Patent-Pending top coil is shielded with proprietary "Flux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S9b-White

SEYMOUR DUNCAN
HOT STACK PLUS
FOR STRAT
WHITE

STK-S9b-White
Seymour Duncan STK-S9b "Hot Stack Plus" pickup for Strat®. Bridge position. White. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is wound like a "hot" single coil for more mids and output. Features symmetrically staggered, sand-cast, Alnico 5 pole pieces. The Patent-Pending top coil is shielded with proprietary "Flux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Wiring diagram and mounting screws are included. Made in the USA.
$85.00
STK-S9b-Black

SEYMOUR DUNCAN
HOT STACK PLUS
FOR STRAT
BLACK

STK-S9b-Black
Seymour Duncan STK-S9b "Hot Stack Plus" pickup for Strat®. Bridge position. Black. The ultimate advancement in the quest for hum-free Strat® tone. The top coil is wound like a "hot" single coil for more mids and output. Features symmetrically staggered, sand-cast, Alnico 5 pole pieces. The Patent-Pending top coil is shielded with proprietary "Flux transfer plates” which intercept most of the hum and “inject” it into the much smaller bottom coil. The top coil gets the tone, and the bottom coil kills the hum. Note that the Stack Plus is .995” (25.27mm) tall, which makes it .175” (4.45mm) taller than a vintage pickup. Wiring diagram and mounting screws are included. Made in the USA.
$85.00