SHIELDING ACCESSORIES

 
005-4490-000
JAGUAR
SHIELD
005-4490-100
Genuine Fender pickup/pickguard shield for Jaguar guitar. Original equipment on vintage models. Reduces electrical noise and hum.
$14.99
KGSAS AMERICAN
SERIES
STRAT
SHIELD
KGSAS
Replacement Kluson aluminum pickguard shield, designed to fit the 8 hole and both 11 hole 3 single coil Fender Strats. This is a universal shield that covers 3 models. The price is unbeatable. Replaces Fender Part Number 001-9699-049.
$8.99
001-9699-049
'62 STRAT
SHIELD
001-9699-049
Genuine Fender '62 reissue pickguard shield. Original equipment on early Strats. Predrilled to fit between the pickguard and body to eliminate hum and noise.
$17.99
001-9640-000
ALUMINUM
'57 STRAT SHIELD
001-9640-000
Aluminum vintage series '57 Strat control area shield.
$4.99
005-4438-000
JAZZMASTER USA
CONTROL SHIELD
005-4438-000
Solid brass. Fits into the cavity on the body under the rhythm circuit to provide shielding from buzz, hum and electrical noise. Also called Preset Control Shield. Brand New. Ships as a genuine Fender warranty part with no Fender packaging.

$6.99
005-4439-000
JAZZMASTER USA
PICKUP SHIELD
005-4439-000
Genuine Fender Jazzmaster Pickup Shield.
$7.99
EP-4969-SML (6) SOLDER LUG
MINI
GROUNDING
WASHERS
EP-4969-SML
(6) Small, solder lug washers for guitar or bass grounding. Measures: 0.626" (15.9mm) Long; 0.314" (8.0mm) Wide. 0.217" (5.5mm) Large Hole Diameter.
$2.49
EP-4968-000 (8) SOLDER LUG
GROUNDING
WASHERS
EP-4968-000
(8) solder lug washers for guitar or bass grounding. 3/8" hole.
$2.99
EP-0499-000 1"X5' COPPER
SHIELDING
TAPE
EP-0499-000
1" X 5' self adhesive copper shield foil. Great for the back of pickguards and shielding cavities. A must have for eliminating electrical hum and noise.
$5.99
EP-4991-000 1 FT. SQ COPPER
SHIELD TAPE
EP-4991-000
1 Ft square of self adhesive copper shieling foil. For eliminating electrical hum and noise.
$9.99
2X5TAPE 2"X5' COPPER
SHIELDING
TAPE
2X5TAPE
2" X 5' self adhesive copper shield foil. Great for the back of pickguards and shielding cavities. A must have for eliminating electrical hum and noise.
$7.99
005-4441-000
JAZZMASTER
SHIELD
005-4441-004
Genuine Fender brass body control cavity shield for American Vintage Reissue Jazzmaster guitar. Reduces electrical hum.
$27.99 OUT OF STOCK
001-4290-020


P BASS
GROUND PLATE

001-4290-020
Genuine Fender grounding plate for P Bass pickups. Reduces noise. Original equipment on early P Basses.
$5.99
001-9723-000


'62 P BASS
PICKGUARD SHIELD

001-9723-000
Genuine Fender '62 P Bass pickguard shield. No wiring necessary. Genuine Fender thin aluminum shielding for the underside of your Precision Bass pickguard helps with noise-cancellation. 13-hole mounting design. Fits American Vintage '62 Precision Bass.
$17.99
001-0686-000 GENUINE FENDER
COPPER
PICKUP SHIELD
FOR JAZZ BASS
001-0686-000
Genuine Fender copper pickup shield for Jazz Bass.
$3.99
001-9659-000


JAZZ BASS
SHIELD PLATE

001-9659-049
Based on Fender's design from the early '60s, this brass plate fits under a Jazz Bass pickup to provide shielding from buzz, hum, and electrical noise. Assembly consists of brass plate, strip of foam rubber for height adjustment, and vintage-style cloth covered ground wire (designed to attach to the volume potentiometer). Brass plate is approximately 3.5" (89 mm) x 0.76" (19 mm).
Used on American Vintage Series (US) Jazz Bass models. Can also be fitted to most vintage basses.
$8.99
001-0694-000


JAZZ BASS
CONTROL CAVITY
SHIELD
BRASS PLATE

001-0694-000
Fender USA Vintage Series Jazz Bass Reissue Brass Master Control Cavity Shield. Fits into the bottom of the master control body cavity under the master volume, tone and output jack on USA Vintage Series Jazz Bass reissue to provide shielding from buzz, hum and electrical noise. Factory part on the American Geddy Lee and '75 AVRI Jazz Bass. Does not ship with packaging as it is just a raw warranty part for repair.
$6.99
   
001-9659-000


JAZZ BASS
SHIELD PLATE

001-9662-000
Based on Fender's design from the early '60s, this brass plate fits under a Jazz Bass pickup to provide shielding from buzz, hum, and electrical noise. Assembly consists of brass plate, strip of foam rubber for height adjustment, and vintage-style cloth covered ground wire (designed to attach to the volume potentiometer). Used on American Vintage Series (US) Jazz Bass models. Can also be fitted to most vintage basses.
$8.99